Technical informations
note options shown in this chart can vary depending truck and/or options
Download Brochure
Options available
The BR is actually the name of the vehicle we install our units on. We can install our entire line of products. From the RH35 to the RH50D sky is the limit. With its working height of 50 ft. (15, 25 m) and its side reach of 39 ft. (11,90 m) it is commonly used to ski patrol assistance, chairlifts and snow maker maintenance, light post maintenance, pruning and so many more.
Our tiltable base allows you to level your aerial lift as if your hillside grooming machine were on a horizontal surface. You can thus work on a 45˚ slope. Equipped with 2 stabilizers, the unit guarantee a safe working environment.
The lifting ring is located at the end of the second section; it is a standard accessory and can lift loads of 550 lbs (250 kg) in any position, regardless of carrier vehicle. And that’s not to mention the many other benefits and options available to ensure that RH aerial lift equipment meets your peculiar needs. Feel free to contact us for more information.
BATTERIES
AERIAL MAINTENANCE/RESCUE UNIT
BR-400 or Prinoth
The connection of the auxiliary battery isolates the vehicle’s aerial lift equipment. The unit will work without the vehicle engine on. In any case, it will affect the vehicle’s battery; it is actually an additional security because if the truck’s battery needs a little “boost”, due to the type of connection, it can feed of the auxiliary battery. All our units have a two-way splitter between the auxiliary battery and the vehicle. We make no modification to your vehicle, only a wire is connected to the alternator which is used to recharge the auxiliary battery when the vehicle is running.
In addition, we can provide additional security by adding a system such as Ozone-tech. This product requires removing the keys from the ignition; press an activator button to operate the unit. Ozone-tech is perfect for fleet owners that want to have some control over the fuel consumption. The system ensures optimum battery management and will turn on the engine if the vehicle needs to recharge the battery to its maximum capacity.
Advanced
HIGH PRECISION
MANUFACTURING
50'
Est. working height (A)
Horizontal reach (B)
Length (retracted) (C)
Interior width (D)
Bucket capacity
Lifting ring
Rotation
Elevation degrees
Approx. weight
GVWR min. required
Hydraulic pressure
15.24m (50')
11.88m (39’)
5.78m (19')
49 cm (19")
159 kg (350 lbs)
250 kg (550 lbs)
360° continue (opt.)
-5° to 80°
658 kg (1450 lbs)
N/A
20684 kPa (3000 psi)
RH All righ reserved 2017 © WEB Lesage concept image
Specification
Wireless
REMOTE CONTROL
RH Ladder uses advanced structural optimizing simulations to ensure safety and enhance toughness. Our engineering approach considers all attributes such as weight, resistance, quality, performance and manufacturability.
Accuracy is crucial to achieve consistent quality. RH Ladder uses waterjet and laser cutting, along with robotic welding to deliver constant precision and reliability.
ROBOTIC WELDING
RH All righ reserved 2017 © WEB Lesage concept image
* Informations shown can vary depending truck and/or options
ask a representative for more details
illustrated with options
• Faster completion of aerial work
• Faster access to slope lighting devices
• Faster access to lift machinery
• Faster access to snowmaking equipment
• Improved tree-trimming capability
• Ski patrol assistance capability
• Working height up to 50 ft
• Insulated and non-insulated modelss
• Compliance with CSA, ANSI, and OSHA standards
RH equipment offer a larger size aluminum bucket for more versatily and resisance. most common use are in signs business and construction. could suit multiple other work needs.
X-TRA large
BUCKET
Options available
RH All rights reserved 2017 © WEB Lesage concept image