Options available


Technical information

note options shown in this chart can

vary depending truck and/or options


Download Brochure



The RH35 is a non-insulated telescoping ladder with a working height of 35 ft. (10.67 m) and a great side reach of 24 ft. (10.67 m). This unit has the advantage of being a 3-section ladder including a lifting ring, as do most of our products.  It is ideally suited for smaller vehicles and jobs in confined spaces (e.g., alleyways). 

With the RH35, you get the rugged reliability and quality RH aerial ladders are known for. That’s without mentioning the many other advantages and options available to ensure that RH aerial ladder equipment meet your specific needs in your field of work. 

This unit can be mounted on many smaller chassis like Ford Transit, Mercedes Sprinter, Nissan NV 3500 or vehicles with a GVWR (gross vehicle weight rating) greater than 9,500 lbs (4,309 kg).  Contact us so we can assist you better.


Est. working height  (A)10.67m (35')11.28 m (37')11.58 m (38')
Horizontal reach      (B)7.42m (24’4'')8.39 m (27'4'')8.39 m (27' 6")
Length (retracted)   (C)3.76m (12'4'')4.97 m (16' 4")4.37 m (14' 4")
Interior width           (D)49 cm (19")60 cm (23")49 cm (19")
Bucket capacity159 kg (350 lbs)159 kg (350 lb)159 kg (350 lb)
Lifting ring 250 kg (550 lbs)N/A250 kg (550 lbs)
Rotation360° continuous (opt.)360° continue (opt.)360° continue (opt.)
Elevation degrees-8° to 85°-8° to 85°-8° to 85°
Approx. weight544 kg (1150 lbs)445 kg (980 lb)498 kg (1100 lb)
GVWR min. required4309 kg (9500 lbs)4309 kg (9500 lb)4309 kg (9500 lb)
Hydraulic pressure20684 kPa (3000 psi)20684 kPa (3000 psi)20684 kPa (3000 psi)



Est. working height  (A)12.5m (41')13.41m (44')14.33m (47')
Horizontal reach      (B)9.25m (30' 4")10.05m (33’)11.07m (36' 4")
Length (retracted)   (C)4.37m (14' 4")5.17m (17')4.98m (16' 4")
Interior width           (D)49 cm (19")49 cm (19")49 cm (19")
Bucket capacity159 kg (350 lbs)159 kg (350 lb)159 kg (350 lb)
Lifting ring 250 kg (550 lbs)250 kg (550 lbs)250 kg (550 lbs)
Rotation360° continuous (opt.)360° continue (opt.)360° continue (opt.)
Elevation degrees-8° to 85°-5° to 85°-5° to 85°
Approx. weight522 kg (1150 lbs)567 kg (1250 lbs)612 kg (1350 lbs)
GVWR min. required5216 kg (11500 lbs)7938 kg (17500 lbs)8620 kg (17500 lbs)
Hydraulic pressure20684 kPa (3000 psi)20684 kPa (3000 psi)20684 kPa (3000 psi)

* Information shown can vary depending on truck and/or options
ask a representative for more details



The connection of the auxiliary battery isolates the vehicle’s aerial lift equipment. The unit will work without the vehicle engine on. In any case, it will affect the vehicle’s battery; it is actually an additional security because if the truck’s battery needs a little “boost”, due to the type of connection, it can feed of the auxiliary battery. All our units have a two-way splitter between the auxiliary battery and the vehicle. We make no modification to your vehicle, only a wire is connected to the alternator which is used to recharge the auxiliary battery when the vehicle is running.


In addition, we can provide additional security by adding a system such as Ozone-tech. This product requires removing the keys from the ignition; press an activator button to operate the unit. Ozone-tech is perfect for fleet owners that want to have some control over the fuel consumption. The system ensures optimum battery management and will turn on the engine if the vehicle needs to recharge the battery to its maximum capacity.



& Engineering

RH Ladder uses advanced structural optimizing simulations to ensure safety and  enhance toughness. Our engineering approach considers all attributes such as weight, resistance, quality, performance and  manufacturability.



This type of aerial ladder must be installed on vehicles whose GVWR (gross vehicle weight rating) is greater than 9,500 lbs (4,309 kg). Outriggers are generally not required. However, given the variety of configurations possible, outrigger requirements must be confirmed by means of stability tests performed on your bucket truck. 


The same applies to the bucket’s load-carrying capacity (in other words, the maximum weight authorized to be carried in the bucket). Specifically, this telescoping ladder is rated to carry 350 lbs (159 kg); however, its actual load-carrying capacity depends on the carrier vehicle. 


We encourage you to contact Robert Hydraulique to obtain more information on the restrictions and factors to be taken into account when installing RH telescoping aerial ladders so that you can meet the highest standards in quality and safety. 


*** Always ensure that you are complying with all local regulations when installing bucket-equipped aerial ladders. Robert Hydraulique is not responsible for installations performed outside its production facilities




Accuracy is crucial to achieve consistent quality. RH Ladder uses water jet and laser cutting, along with robotic welding, to deliver constant precision and reliability.

Water jet Cutting

Numeric tooling technologies