Technical informations

note options shown in this chart can vary depending truck and/or options 

Download Brochure

Options available

The RHS34 is a non-insulated telescoping platform that turns into steps with a working height of 34 ft. (10.36 m) and 26, 7 ft. (8,14 m) of side reach. The “S” in RHS34 is in referral in step because it can be used as a perfect flat platform and as it deploys itself becomes a 60-degree stairs case.

This unit reflects the firm’s commitment to R&D and was developed in conjunction with the SOPFEU of Quebec, the RHS34 is tailored to the specific requirements of airport and aircraft maintenance and many more without compromising safety. This unit can be mounted on many smaller chassis like the GMC Savana, Ford Transit, Mercedes Sprinter or vehicles with a GVWR (gross vehicle weight rating) greater than 9,500 lbs (4,309 kg).

The use of STRENX steel comes in handy; you get the ruggedness and quality RH Aerial Lift Equipment is known for and its light weight allows the vehicle to move faster and be more efficient. Key in hand option is available. Please contact us to see what we can do for your chosen vehicle and arrangement

 

 

Call for more details

 

 

BATTERIES

AUTO-LEVELLING PLATFORM

STAIRS

This type of aerial ladder must be installed on vehicles whose GVWR (gross vehicle weight rating) is greater than 9,500 lbs (4,309 kg). Outriggers are generally not required. However, given the variety of configurations possible, outrigger requirements must be confirmed by means of stability tests performed on your bucket truck.

 

The same applies to the bucket’s load-carrying capacity (in other words, the maximum weight authorized to be carried in the bucket). Specifically, this telescoping ladder is rated to carry 350 lbs (159 kg); however, its actual load-carrying capacity depends on the carrier vehicle.

 

We encourage you to contact Robert Hydraulique to obtain more information on the restrictions and factors to be taken into account when installing RH telescoping aerial ladders so that you can meet the highest standards in quality and safety.

 

*** Always ensure that you are complying with all local regulations when installing bucket-equipped aerial ladders. Robert Hydraulique is not responsible for installations performed outside of its production facilities

The connection of the auxiliary battery isolates the vehicle’s aerial lift equipment. The unit will work without the vehicle engine on. In any case, it will affect the vehicle’s battery; it is actually an additional security because if the truck’s battery needs a little “boost”, due to the type of connection, it can feed of the auxiliary battery. All our units have a two-way splitter between the auxiliary battery and the vehicle. We make no modification to your vehicle, only a wire is connected to the alternator which is used to recharge the auxiliary battery when the vehicle is running.

 

In addition, we can provide additional security by adding a system such as Ozone-tech. This product requires removing the keys from the ignition; press an activator button to operate the unit. Ozone-tech is perfect for fleet owners that want to have some control over the fuel consumption. The system ensures optimum battery management and will turn on the engine if the vehicle needs to recharge the battery to its maximum capacity.

 

 

Advanced

HIGH PRECISION

MANUFACTURING

34'

IMPORTANT

note:

Est. working height  (A)

Horizontal reach      (B)

Length (retracted)   (C)

Interior width           (D)

Bucket capacity

Lifting ring

Rotation

Elevation degrees

Approx. weight

GVWR min. required

Hydraulic pressure

10.3m (34')

8.51m (27' 11")

4.97m (16' 4")

60 cm (23")

159 kg (350 lbs)

250 kg (550 lbs)

360°  continuous opt.

-0° to 85°

567 kg (1250 lbs)

4309 kg (9500 lbs)

20684 kPa (3000 psi)

RH All righ reserved 2017  © WEB Lesage concept image

Specification

Wireless

REMOTE CONTROL 

RH Ladder uses advanced structural optimizing simulations to ensure safety and  enhance toughness. Our engineering approach considers all attributes such as weight, resistance, quality, performance and  manufacturability. 

 

 

Accuracy is crucial to achieve consistent quality. RH Ladder uses waterjet and laser cutting, along with robotic welding to deliver constant precision and reliability.

 

 

ROBOTIC WELDING

RH All righ reserved 2017  © WEB Lesage concept image

RH All righ reserved 2017  © WEB Lesage concept image

* Informations shown can vary depending truck and/or options

ask a representative for more details

illustrated with options