Technical informations

note options shown in this chart can vary depending truck and/or options 

Download Brochure

Options available

The RH41 is a non-insulated telescoping ladder that extends to a working height of 41 ft (12.50 m). The RH41 has 3 ladder sections equipped with a lifting ring like most of our products and it grant you to lift up to 550 lbs (250 kg) in any position, regardless of the chosen vehicle.

 

With the RH41, you get the rugged reliability and durability that RH aerial ladders are known for, at the best price. Our unit will provide you with 30 ft. (9.25 m) of side reach. That is without mentioning all the advantages and add on available to ensure that RH aerial lift equipment meet your specific needs.

 

This unit can be mounted on different chassis as long as the GVWR (gross vehicle weight rating) is greater than 11,500 lbs (5,216 kg) like Ford F450 or E450, Hino and so many more. Feel free to contact us for valuable information.

 

 

 

BATTERIES

AERIAL LADDER 

NON-INSULATED 

This type of aerial ladder must be installed on vehicles whose GVWR (gross vehicle weight rating) is greater than 9,500 lbs (4,309 kg). Outriggers are generally not required. However, given the variety of configurations possible, outrigger requirements must be confirmed by means of stability tests performed on your bucket truck.

 

The same applies to the bucket’s load-carrying capacity (in other words, the maximum weight authorized to be carried in the bucket). Specifically, this telescoping ladder is rated to carry 350 lbs (159 kg); however, its actual load-carrying capacity depends on the carrier vehicle.

 

We encourage you to contact Robert Hydraulique to obtain more information on the restrictions and factors to be taken into account when installing RH telescoping aerial ladders so that you can meet the highest standards in quality and safety.

 

*** Always ensure that you are complying with all local regulations when installing bucket-equipped aerial ladders. Robert Hydraulique is not responsible for installations performed outside of its production facilities 

The connection of the auxiliary battery isolates the vehicle’s aerial lift equipment. The unit will work without the vehicle engine on. In any case, it will affect the vehicle’s battery; it is actually an additional security because if the truck’s battery needs a little “boost”, due to the type of connection, it can feed of the auxiliary battery. All our units have a two-way splitter between the auxiliary battery and the vehicle. We make no modification to your vehicle, only a wire is connected to the alternator which is used to recharge the auxiliary battery when the vehicle is running.

 

In addition, we can provide additional security by adding a system such as Ozone-tech. This product requires removing the keys from the ignition; press an activator button to operate the unit. Ozone-tech is perfect for fleet owners that want to have some control over the fuel consumption. The system ensures optimum battery management and will turn on the engine if the vehicle needs to recharge the battery to its maximum capacity.

 

 

Advanced

HIGH PRECISION

MANUFACTURING

41'

IMPORTANT

note:

Est. working height  (A)

Horizontal reach      (B)

Length (retracted)   (C)

Interior width           (D)

Bucket capacity

Lifting ring

Rotation

Elevation degrees

Approx. weight

GVWR min. required

Hydraulic pressure

12.5m (41')

9.25m (30' 4")

4.37m (14' 4")

49 cm (19")

159 kg (350 lbs)

250 kg (550 lbs)

360° continuous (opt.)

-8° to 85°

522 kg (1150 lbs)

5216 kg (11500 lbs)

20684 kPa (3000 psi)

13.41m (44')

10.05m (33’)

5.17m (17')

49 cm (19")

159 kg (350 lbs)

250 kg (550 lbs)

360° continue (opt.)

-5° to 85°

567 kg (1250 lbs)

7938 kg (17500 lbs)

20684 kPa (3000 psi)

RH All righ reserved 2017  © WEB Lesage concept image

Specification

Muli-Functions

CONTROL

RH Ladder uses advanced structural optimizing simulations to ensure safety and  enhance toughness. Our engineering approach considers all attributes such as weight, resistance, quality, performance and  manufacturability. 

 

 

Accuracy is crucial to achieve consistent quality. RH Ladder uses waterjet and laser cutting, along with robotic welding to deliver constant precision and reliability.

 

 

ROBOTIC WELDING

RH All righ reserved 2017  © WEB Lesage concept image

* Informations shown can vary depending truck and/or options

ask a representative for more details

Est. working height  (A)

Horizontal reach      (B)

Length (retracted)   (C)

Interior width           (D)

Bucket capacity

Lifting ring

Rotation

Elevation degrees

Approx. weight

GVWR min. required

Hydraulic pressure

10.67m (35')

7.42m (24’4'')

3.76m (12'4'')

49 cm (19")

159 kg (350 lbs)

250 kg (550 lbs)

360° continuous (opt.)

-8° to 85°

544 kg (1150 lbs)

4309 kg (9500 lbs)

20684 kPa (3000 psi)

Specification

14.33m (47')

11.07m (36' 4")

4.98m (16' 4")

49 cm (19")

159 kg (350 lbs)

250 kg (550 lbs)

360° continue (opt.)

-5° to 85°

612 kg (1350 lbs)

8620 kg (17500 lbs)

20684 kPa (3000 psi)

illustrated with options

11.58m (38')

8.03m (26' 4")

4.37m (14' 4")

49 cm (19")

159 kg (350 lbs)

250 kg (550 lbs)

360° continue (opt.)

-8° to 85°

498kg (1100 lbs)

4309 kg (9500 lbs)

20684 kPa (3000 psi)

11.28m (37')

8.51m (27' 11")

4.97m (16' 4")

60 cm (23")

159 kg (350 lbs)

N/A

360° continue (opt.)

-8° to 85°

445kg (980 lbs)

4309 kg (9500 lbs)

20684 kPa (3000 psi)

RH All rights reserved 2017  © WEB Lesage concept image