Technical informations

note options shown in this chart can vary depending truck and/or options 

Download Brochure

Options available

The RH38DGA is an insulated telescopic ladder with a working height of 38 feet (11.58 m). Featuring a "Goose Neck" and three sections ladder for extra efficiency, the RH38DGA is ideal for businesses that require ground access. A side door to the bucket allows you to climb into the basket from the bumper or the ground. This model is an unmatched product on the market.

The lifting ring located at the end of the second section is a standard accessory that can lift loads of 500 pounds (250 kg) (opt.) in any position, regardless of the carrying vehicle. True to RH standards, we offer a range of products with maximized capabilities such as cargo space, payload and basket capacity. This will vary depending on the model of the vehicle. The 3-section design makes your unit more stable and stiffer when extended, for unparalleled ease of use. You want to work with even more precision? Ask about our 2-speed option.

This fully electric unit can be mounted on different chassis and is designed with a swivel platform at the base of the ladder to facilitate evacuation in any position.

The GA "Ground Access" Series is available on all our dielectric models.

 

 

 

 

 

BATTERIES

AERIAL LADDER with ground ACCESS

INSULATED

This type of aerial ladder must be installed on vehicles whose GVWR (gross vehicle weight rating) is greater than 9,500 lbs (4,309 kg). Outriggers are generally not required. However, given the variety of configurations possible, outrigger requirements must be confirmed by means of stability tests performed on your bucket truck.

 

The same applies to the bucket’s load-carrying capacity (in other words, the maximum weight authorized to be carried in the bucket). Specifically, this telescoping ladder is rated to carry 350 lbs (159 kg); however, its actual load-carrying capacity depends on the carrier vehicle.

 

We encourage you to contact Robert Hydraulique to obtain more information on the restrictions and factors to be taken into account when installing RH telescoping aerial ladders so that you can meet the highest standards in quality and safety.

 

*** Always ensure that you are complying with all local regulations when installing bucket-equipped aerial ladders. Robert Hydraulique is not responsible for installations performed outside of its production facilities

The connection of the auxiliary battery isolates the vehicle’s aerial lift equipment. The unit will work without the vehicle engine on. In any case, it will affect the vehicle’s battery; it is actually an additional security because if the truck’s battery needs a little “boost”, due to the type of connection, it can feed of the auxiliary battery. All our units have a two-way splitter between the auxiliary battery and the vehicle. We make no modification to your vehicle, only a wire is connected to the alternator which is used to recharge the auxiliary battery when the vehicle is running.

 

In addition, we can provide additional security by adding a system such as Ozone-tech. This product requires removing the keys from the ignition; press an activator button to operate the unit. Ozone-tech is perfect for fleet owners that want to have some control over the fuel consumption. The system ensures optimum battery management and will turn on the engine if the vehicle needs to recharge the battery to its maximum capacity.

 

 

Advanced

HIGH PRECISION

MANUFACTURING

38' 

IMPORTANT

note:

Est. working height  (A)

Horizontal reach      (B)

Length (retracted)   (C)

Interior width           (D)

Bucket capacity

Lifting ring

Rotation

Elevation degrees

Approx. weight

GVWR min. required

Hydraulic pressure

RH All righ reserved 2017  © WEB Lesage concept image

Specification

Wireless

REMOTE CONTROL 

RH Ladder uses advanced structural optimizing simulations to ensure safety and  enhance toughness. Our engineering approach considers all attributes such as weight, resistance, quality, performance and  manufacturability. 

 

 

Accuracy is crucial to achieve consistent quality. RH Ladder uses waterjet and laser cutting, along with robotic welding to deliver constant precision and reliability.

 

 

ROBOTIC WELDING

RH All righ reserved 2017  © WEB Lesage concept image

illustrated with options

* Informations shown can vary depending on truck and/or options

ask a representative for more details

RH All rights reserved 2017  © WEB Lesage concept image

11.58m (38')

8.07m (26’6'')

4.27m (14'6'')

49 cm (19")

159 kg (350 lbs)

250 kg (550 lbs)

360° continuous (opt.)

-10° to 80°

498 kg (1190 lbs)

4309 kg (9500 lb)

20684 kPa (3000 psi)